|
Model 9400 gives you the ability to: - Vary your speeds
from 0 to 1200 rpm
- Adjust speeds while operating in the material
- High
torque at low rpm speeds
- Instantaneous reversing for tapping
- Tapping
head is not needed
- Machine tap goes into ball bearing chuck
- Can
tap either left or right handed threads
- Drill head and tanle rotate 360 degrees
around column
- Smooth operating table raiser
- Fully enclosed spindle
- Quill lock and depth control
Drill Press Specifications: - Model: 9400
- Motor: 2HP A.C. single phase-choose 110/220
|
Control Box: - Infinitely variable speed- with a turn of
the dial
- Instantaneous electronic reversing
- Full torque at low
speeds
- All solid state circuitry
- Continuous speed adjustment while
in operation
- Spindle Speeds: 0-1200 rpm
- Drills to center: 18-1/8"
- Drilling Capacity:
- Steel: 1-1/16"
- Cast Iron: 1-1/4"
- Tapping Capacity: 3/4"
- Morse Taper: No. 3
- Quill
Diameter: 3"
- Column Diameter: 4"
- Spindle Travel: 5-3/8"
- Spindle to Table (max): 27-1/4"
- Spindle to Base: 46-1/4"
- Shipping Weight: 675 lbs
- Table:
- Production Type
- t-slotted
- 15-7/8" x 17-7/8"
- 2 slots for 1/2" t-bolts
- ground working surface
- coolant trough
- Base:
- t-slotted
- 16-3/8" x 26-5/8"
- 2 slots for 1/2" t-bolts ground working surface
- Size:
- Height- 69-1/2"
- Width- 20"
- Depth- 29"
- Options:
- Power
down feed
- Ball bearing chuck
- Drill press vise
- 16-1/2" diameter round table
|
